SHOW PREVIEW

PRODUCT LIST
SMART POSITIONER

Positioners is a automation device to regulate process valves. There are so many types of positioners in the market, however, rarely has user friendly interface. Almost all of them requires sophisicated person to operate, especially, when there is an issue that need to reset the device.
GEMU 1441 Positioner comes with BLUETOOTH feature that will enable user to access and operate the device from smartphone.

Product Description

Brand : GEMU
Model : 1441

FEATURES

  • 2-wire-connection technology
  • Quick commissioning using well-balanced preconfiguration
  • HART communication available upon request
  • “Fail safe” and “Fail freeze” safety function available
  • BLE communication for remote access and configuration
  • Almost no air consumption when idle

TECHNICALS

  • Ambient temperature : -10 to 60 °C
  • Operating pressure : 1.5 to 7 bar
  • Mode of action : Double acting | Single acting
  • Flow rate : 115 Nl/min
  • Linear measuring range : 2 to 75 mm
  • Radial measuring range : 0 – 90°
  • Supply voltage : Via set value signal
  • Electrical connection types : M16 cable gland | M12 plug
  • Communication modes : BLE (Bluetooth Low Energy) | HART

 

Exhibitor’s Profile

T.V.P. VALVE AND PNEUMATIC CO., LTD.

Booth No : SI03
Website : http://www.tvp.co.th

See also different:

VACUUM EJECTOR ENERGY SAVING
VACUUM EJECTOR ENERGY SAVING

It is very difficult to save energy when using vacuum ejectors as there is compressed air flow required to maintain vacuum level at all time during pick & place process. PISCO VJ-DWE has feature of “auto stop” and “auto hysteresis” which a […]

PRE-SET PRESSURE REGULATOR
PRE-SET PRESSURE REGULATOR

It is very common problem that operators are trying to adjust pressure by themselves,which is sometimes not meant to do. PISCO Pre-set Regulators protect this problem by factory “Pre-Set” the required pressure value, then there is no adjusting […]

ISO3 SOLENOID VALVES
ISO3 SOLENOID VALVES

Solenoid Valve ในมาตรฐาน ISO ต่างสามารถติดตั้งบนฐานเดิมได้ แม้ว่าจะเป็นวาล์วคนละยี่ห้อกัน หากแต่สิ่งที่แตกต่างกัน คือ Respond Time และ Flow rate ซึ่งมีผลกระทบต่อ process ของผู้ใช้งานโดยตรง MAC Valve ISO คือ Solenoid Valve ISO ที่การันตี Respon […]